Anet 3D Printer Filament PLA 1.75mm 1KG/2.2LBS Roll Blue Consumables Promotion

Description

Anet 3D Printer Filament PLA 1.75mm 1KG/2.2LBS Roll Blue Consumables Promotion
3D Printer PLA Filament:
Print Temperature: 195-230 ℃
Density:1.25g±0.05g/cm3
Flow Velocity: 5-7g/10min(190℃ 2.16KG)
Hydroscopicity : 0.50%
Tensile Strength ≥60MPa
Flexural Modulus ≥60MPa
Elongation at Rupture:≥3.0%.
Diameter: 1.75mm
Bubbles:100% No bubble
Net weight: 1KG
Packing: plastic tray, net weight 1KG, put desiccant, vacuum packaging,
Packaging form:Carton packaging
Package List:
1 * PLA  Filament
Note:
Please allow 1-2cm errors due to manual measurement.
The color of the item may vary slightly due to photography and your own computer, please in kind prevail, thanks!
The filament trays may different from the pictures. Because the Production batch are different. But the material and the filament are same,thank you for your understanding
Usage:
1. The filament tray is installed on the filament rack of the 3D printer. Check whether the filament is entangled or knotted before installation.
2. Cut the filament head into a spire shape for easy penetration into the guide tube and feed motor bore.
3. Manually push the filament through the extruder throat till the hotend and there should be filament melt through the nozzle.