Beliveer PLA+ 3D Printing Filament Consumables 1.75mm 2.2lbs Length 320M

Description

PLA Filament
1. Environmental protection, non-toxic, biodegradable;
2. Bright color;
3. Low shrinkage;
4. High strength and strong rigidity;
Suitable for all types of FDM3D printers, suitable for printing handicrafts, artwork and industrial design samples, etc.
Parameter
Wire diameter: 1.75 mm
Tolerance: ±0.02MM
Printing temperature: 200-230℃
Bottom plate temperature: Glue water is required when not heated. Glue water is not required to heat 60-80℃
Rally (KGF): 11-16
Melt index: 7-9g/10min (190℃, 2.16Kg)
Elongation at break: 4%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1 KG/roll
Gross weight: 1.3 KG/roll
Length: 1.75MM(1KG)=330M
PLA+ Filament
1. Environmental protection, non-toxic, biodegradable;
2. Bright color;
3. Low shrinkage;
4. High strength and high rigidity;
5. Good toughness and not easy to be brittle;
6. 10 times higher toughness than PLA on the market, printing is smooth, and the finished surface is smoother and more delicate;
Suitable for all types of FDM3D printers, suitable for printing handicrafts, artwork, industrial design samples, and product models with higher toughness requirements.
Parameter
Wire diameter: 1.75MM
Tolerance: ±0.02MM
Printing temperature: 210-235℃
Floor temperature: 70-80℃
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1 KG/roll
Gross weight: 1.3 KG/roll
Length: 1.75MM(1KG)=330M
ABS Filament
1. Has excellent impact strength and wear resistance;
2. Chemical resistance, dyeing, molding processing and mechanical processing effect is better;
3. The support is easy to peel off;
It is suitable for equipment with heating device on the bottom plate.
It can print models that require strong printing strength and require subsequent processing, such as: dyeing, polishing, electroplating, etc., suitable for making small parts.
Parameter
Wire diameter: 1.75 mm
Tolerance: ±0.02MM
Printing temperature: 230-270℃
Floor temperature: 80-120℃
Rally (KGF): 6-11
Melt index: 12-19g/10min (220℃, 10kg)
Elongation at break: 25%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1 KG/roll
Gross weight: 1.3 KG/roll
Length: 1.75MM(1KG)=395M
PETG  Filament
1. Environmental protection and non-toxic;
2. Bright color;
3. Low shrinkage;
4. Good toughness, not easy to be brittle, good acid and alkali resistance, excellent toughness, weather resistance, and good adhesion.
5. Good dimensional stability, no cracks and warpage.
6. High transparency and good gloss.
Suitable for all types of FDM3D printers, suitable for printing commonly used models, handicrafts, industrial parts, advertising characters, etc.
Parameter
Wire diameter: 1.75MM
Tolerance: ±0.02MM
Printing temperature: 220-250℃
Bottom plate temperature: Glue water is required when not heated. Glue water is not required to heat 60-80℃
Rally (KGF): 8-14
Melt index: 6-11g/10min (220℃, 2.16kg)
Elongation at break: 210%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1KG/roll
Gross weight: 1.3KG/roll
Length: 1.75MM(1KG)=320M
TPU Filament
Diameter: 1.75mm
Tolerance: +/-0.02mm
Print speed: 20-40mm/s
Color:black
Recommend print Temperature: 205-230℃
Net weight: 0.5kg with spool
Gross weight: 0.8kg
Length：1.75mm(0.5kg)=165m
Silk PLA+ Filament
Silk PLA+ filament is a degradable, non-toxic material, close to the silk effect, the toughness of it is  50 times higher than PLA.  Neat winding filament prints smoothly, no tangle.  100% No bubble 3d printing filament.
Parameter
Tolerance: +/-0.02mm
Diameter: 1.75mm
Printing speed: 30-60mm/s
Printing temperature: 200-230 degree
Weight: 1kg with spool
Length:1.75mm(1kg)=330m
Packing: Vacuum bag packing with box