Keyence FS-V31C Fiber Optic Sensor Amplifier, 33µs, NPN, M8 Connector, 12-24VDC

Description

Keyence FS-V31C Fiber Optic Sensor Amplifier, 33µs, NPN, M8 Connector, 12-24VDC.
Condition: "New", if you are not satisfied with this picture please email us with the item number and we will reply with more pictures.
Model
FS-V31C
Type
1-output + 1-input
with M8 connector
Output
NPN
Main unit/Expansion unit
Main unit
Control output
1 output
Monitor output (1 to 5 V)
N/A
External input
1 input
Connector
M8
Light source LED
Red, 4-element LED (Wavelength: 640 nm)
Response time
33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)
Output selection
LIGHT-ON/DARK-ON (switch-selectable)
Display indicator
Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) and
Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,
Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variations
Bar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display
Detection mode
Light intensity (area detection possible, automatic sensitivity-tracking function provided)
Timer function
OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectable
Timer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.
Control output
NPN open-collector 24 V, 100 mA max.
*1
(main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.
External inputy
Input time: 2 ms (ON)/20 ms (OFF) min.
*2
Unit expansion
Up to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.
Number of interference prevention units
Normal operation
HIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台
Size
30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D)
1.19" (H) x 0.39" (W) x 2.83" (D)
Rating
Power voltage
12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Power consumption
Normal: 710 mW max. (Using 24 V, 29 mA max., using 12 V, 40 mA max.)/Power saving: 540 mW max. (Using 24 V, 22 mA max., using 12 V, 28 mA max.)
*3
Environmental resistance
Ambient light
Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.
Ambient temperature
-10 to +55 °C
14 to 131 °F
(No freezing)
*4
Relative humidity
35 to 85 % RH (No condensation)
Vibration resistance
10 to 55 Hz, Double amplitude 1.5 mm
0.06"
, 2 hours in each of the X, Y, and Z directions
Shock resistance
500 m/s
2
, 3 times in each of the X, Y, and Z directions
Case material
Polycarbonate
Accessories
N/A
Weight
Approx. 80 g
*1
Total current of two outputs should be less than 100 mA.
*2
Only available on certain models.
*3
When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA).
*4
If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.
1 to 2 Units: -10 to +55 °C
14 to 131 °F
, 3 to 10 Units: -10 to +50 °C
14 to 122 °F
, 11 to 16 Units: -10 to +45 °C
14 to 113 °F
Return Policy
-----------------------
30 Day Money Back Guarantee
We offer a 7 day no questions asked return policy on all items sold. What does this mean for you? You have 7 days from the day you receive your product/s to call or email us. We will then issue a refund via PayPal. We try to maintain a high feedback score and we are always willing to work with you on any problem. So please contact us before you resort to leaving negative feedback.