Polycarbonate Pro Series 3D Printer Filament - 3DMaker Engineering

Description

Our Pro Series Polycarbonate filament can withstand even the most demanding applications. Its high strength and temperature resistance make it excellent for functional prototypes. We only use quality materials to produce our filament to ensure your printed parts outperform your design requirements.
Filament Specs:
Hotend Temperature (°C):
235-270 (
Recommended:
255)
Bed Temperature (°C):
90-120 (
Recommended:
100)
Filament Diameter (mm):
1.75±0.03
Net Weight:
1kg (2.2 lbs)
Build Surface:
PEI
Print Parameters:
We have spent thousands of hours testing our filament with several printer types and recommend these printing settings.
Default Print Speed:
30-60 mm/s (
Recommended:
40 mm/s)
First Layer Height:
0.24 mm
First Layer Speed:
15 mm/s
Extrusion Width:
0.48 for 0.4 Nozzle (1.2X Nozzle Diameter)
Retraction:
Bowden 5mm @ 45 mm/s or Direct 2mm @ 45 mm/s
Perimeter Print Speed:
70% of Default Print Speed
Infill and Support Print Speed:
80% of Default Print Speed
Fan Profile:
0% (Fan Not Recommended)
XY Jerk:
8
Z Jerk:
0.3
E Jerk:
5
Acceleration (Print/Travel):
300
Retract Acceleration:
1000
Travel Speed (non-print moves):
120 mm/s
*Special Notes:
PC absorbs water from the air quickly.
We recommend drying filament before first use
and storing air tight with desiccant to maintain dryness. Please see our article on how to dry filament. Symptoms of wet filament include extruder popping and finished parts that are brittle due to poor layer adhesion.
Our PC will print at a wide range of temperatures but layer adhesion is much better at the top end of the suggested range.