SUNLU 3D Printer Filament PLA PETG TPU SILK SPLA 1.75mm 1kg Multiple Color

Description

Store category
Sign Up Now !
You may also like
SUNLU 3D Printer Filament PLA PETG TPU SILK SPLA 1.75mm 1kg Multiple Color
Product Description
ABS
1. Excellent impact strength and wear resistance;
2. Chemical resistance, dyeing, molding and mechanical processing effects are good;
3. The support is easy to peel;
Suitable for equipment with heating device on the bottom plate;
Printable models that have strong print strength requirements and require subsequent processing, such as: dyeing, polishing, electroplating, etc.;
Suitable for playing small parts and so on.
PETG
1. Environmental protection and non-toxic;
2. Bright color;
3. Low shrinkage;
4. Good toughness, not easy to be brittle, good acid and alkali resistance, excellent toughness, weather resistance and good adhesion.
5. Good dimensional stability, no cracks and warpage.
6. High transparency and good gloss.
Applicable to all models of FDM3D printers, suitable for printing all kinds of commonly used models, crafts, industrial parts, advertising words, etc.
PLA
1. Environmental protection, non-toxic, biodegradable;
2. Bright color;
3. Low shrinkage;
4. High strength and strong rigidity;
Applicable to all models of FDM3D printers, suitable for printing crafts, artworks and industrial design samples.
PLA+
1. Environmentally friendly, non-toxic, biodegradable;
2. Bright color;
3. Low shrinkage rate;
4. High strength and high rigidity;
5. Good toughness and not easy to be brittle;
6. Ten times higher toughness than PLA on the market
Printing is smooth, and the surface of the finished product is smoother and more delicate;
Suitable for all types of FDM3D printers, suitable for printing handicrafts, artworks, industrial design samples and product models with higher toughness requirements, etc.
SILK
1. Environmental protection, non-toxic, biodegradable;
2. Close to silk effect;
3. Low shrinkage
4. Toughness 50 times higher than PLA on the market
The printing is smooth, and the surface of the finished product is smoother and more delicate;
Suitable for all models of FDM3D printers.
Suitable for printing handicrafts, artworks, industrial design samples
And product models with higher toughness requirements, etc.
TPU-0.5KG
1. Environmental protection and non-toxic;
2. Bright color;
3. High resilience;
4. The material is soft and has good extensibility;
5. Good aging resistance;
Suitable for all types of FDM3D printers, suitable for printing children's toys, shoes, medical supplies and other product models with good stretchability.
SPLA
1. Environmental protection, non-toxic, odorless printing;
2. High transparency and bright color;
3. Good aging resistance;
4. Good mechanical properties and high toughness;
5. The printed product is delicate and bright;
Suitable for all models of FDM3D printers on the market,
It is suitable for printing commonly used models, crafts, industrial parts, advertising characters, etc.
Parameter
Tolerance: +/-0.02mm
Diamenter: 1.75mm
Weight: 1kg with spool
Packing: Vacuum bag packing with box
Printing speed:
ABS
50-100MM/s
PLA
50-100MM/s
TPU-0.5KG
20-40MM/s
PETG
50-100MM/s
SILK
30-60MM/s
SPLA
30-60MM/s
PLA+
50-100MM/s
Printing temperature:
ABS
230-270
degree
PLA
200-230
degree
TPU-0.5KG
205-230
degree
PETG
220-250
degree
SILK
200-230
degree
SPLA
210-230 degree
PLA+
210-235℃
Wood print Temperature: 170-190℃
Length:
ABS
395M
PLA
330M
TPU-0.5KG
165M
PETG
320M
SILK
330M
SPLA
330M
PLA+
330M
SUNLU Printer Filament Storage Tips:
1. We recommended storing filament in a sealed plastic bag or box after each print (a large ziplock or Tupperware works well).
2. In extreme cases where the filament gets damp, you can bake it in an oven with 50-degree Celsius for about an hour to restore its dryness. 3.Each time after use of your 3D Printer Filament. Be sure to insert the free end of the filament into the hole to avoid the filament being tangled for next time use.
Notice Before Place order：
1.Some of the new packaging has been changed to kraft paper box as shown in follows picture(without any SUNLU logo), please think it through before you place order if you mind that.
2.SUNLU is supplier of GeeeTech,Since a mistake of our packaging department they directly covered the unavailable GeeeTech label with blank labels for the new arrive shipment.Please don't worry about the quality will be deffereny,we produce the filament in same materials and technology except the packing.
3.Our PETG white is as transparent as the picture. We have not produced pure white PETG filament for the time being.
4.TPU is difference from other filaments. The weight is 0.5kg.Please take consideration before you place order.
5.We both sell PLA-silver and SILK-silver, please look carefully before you place order.Thank you for your cooperation!
About volume discount:
We recently initiated a quantity discount which allows you to spend less money to buy more filaments, and we can also reduce shipping costs.
If you buy
2
filaments, you can get a
5%
discount.
If you buy
3
filaments, you can get a
15%
discount.
If you buy
4
or more filaments, you can get a
25%
discount.
The more you buy, the more money you can save.
Kindly reminding: Different colors and different materials of filaments are bought in this listing, the volume discount is also effective.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept
PayPal
only.
Delivery details
1.Goods will be delivered within 2-3 working days after the payment received
2.We ship the items according to your Paypal address except the special notes from buyers !
3.Be sure that your Paypal address is correct when you buy the items in ebay.
4.We do not take responsibility for item loss due to wrong address.
5.We are not responsible for any customs duty incurred at foreign customs.If you want to ship in other way, please contact us.
Terms of sales
1. Buyers must contact us within 30 days upon receiving the item(s), buyers should be responsible for the shipping cost for sending item(s) back and the shipping cost for re-sending the new item(s).
2. Please keep our products in original condition (packaging) if you return the item(s). If your item arrives faulty, we will exchange it for a replacement.
3. If you prefer a refund, we will fully refund to you through Paypal when we get the item.
About us
We specialize in producing and selling 3D printer and 3D printer filaments.
We have warehouses in the United States, United Kingdom, Germany and Australia.
The headquarters of our company is in China.
Our products are sent to customers after layer-by-layer inspection, quality assurance.
If you are interested in our products. Welcome to visit our shop. wish you a happy life!
Contact us
T
he best way to contact us is by eBay messages.
We always reply eBay messages that are sent to us with an inquiry, usually within 24 hours of receipt or sooner. We will answer all eBay messages during our business hours. (Monday - Friday 9:00 am to 6:00 pm HKT except all Holidays)
Please do not leave any low detailed seller ratings, neutral or negative feedback before contacting us.
We commit you 100% satisfaction guarantee.
Payment
Shipping
Return policy
About us