U TUBE HEATER Commercial - Infrared - Natural Gas - 20 Ft Tube - 75,000 BTU a

Description

*WE OFFER FREE SHIPPING TO ANYWHERE IN THE CONTIGUOUS (LOWER 48) UNITED STATES.
ALL OTHER DESTINATIONS, PLEASE CONTACT US FOR A FREIGHT QUOTE*
________________________________________________________________________________________________________________
Model:
VIRWBB59807
Condition:
New
Description:
U-Tube Infrared Heater - Industrial/Commercial
Features:
75,000 BTU - Natural Gas Fired - 20 Ft Long Tube (Overall Heater Length: 12.75 Ft) - Infrared - Aluminized Steel Combustion Chamber - Vacuum System Features Totally Enclosed Combustion Chamber- Direct or Indirect Vented Operation - CSA Certified, UL Listed - Made in the USA
Payment Options:
We Accept all Major Credit Cards, Personal & Business Checks, Bank Wire Transfers and Financing through
PayPal Credit
Shipping:
We Ship Worldwide via Air, Ocean and Common Carrier.  Contact us for a Freight Quote
______________________________________________________________________________________________________
SEE OUR FULL LINE OF
NATURAL GAS HEATERS
BY FOLLOWING THIS LINK:
OUR NATURAL GAS HEATER LINE
This series of commercial/industrial u-tube type infrared heaters is available in 50,000 BTU to 175,000 BTU configurations.  Available in both Natural Gas and LP Propane setups.  Length ranges from 20 Ft to 50 Ft
Questions?  Give our Customer Service Department a Call
Description & Specifications:
Industrial/Commercial Natural Gas Fired U-Tube Heater - 75,000 BTU - 20 Ft Long
Tube (Overall Heater Length: 12.75 Ft)
Our USA made infrared u-tube heaters provide efficient uniform radiant energy distribution.  U-tube heaters are recommended for high heat loss areas including loading docks and commercial/industrial buildings where doors are constantly open
Reliable direct spark ignition and 100% gas shut-off safety control
Up to 50 Ft of ducting-in fresh air and 75 Ft sidewall venting capability
Vacuum system features a totally enclosed combustion chamber
Commercial grade heavy duty draft inducer assembly features permanently lubricated totally enclosed ball bearing motor for maintenance free operation
Highly efficient aluminum reflectors
Includes diaphragm air switch, heavy duty cast iron burner and burner inspection site glass and diagnostic monitoring light system
Aluminized steel combustion chamber makes our line of u-tube heaters ideal for corrosive environments
Heater Type: Infrared - U-Tube - Commercial/Industrial
Fuel Requirement: Natural Gas (NG)
BTU Rating: 75,000
Current Rating: 120V, 60 Hz, 1 Phase, 2.6 Amp
Length of Heater Tube: 20 Ft
Overall Length of Heater: 12.75 Ft
Venting: Direct or indirect venting.  75 Ft sidewall venting and 50 Ft outside air combustion capability
Ignition: Direct spark
Safety Controls: 100% gas shut off
Clearance to Combustibles - Side: 24"
Clearance to Combustibles - Ceiling: 6"
Clearance to Combustibles - Below: 60"
Clearance to Combustibles - End: 52"
Mounting: Horizontal or angle mounting up to 45º
Gas Pipe Connection: 1/2" MPT male
Tube Diameter: 4"
Flue Connection: 4" Round
Fresh Air Connection: 6" Round
Includes 36" stainless steel flexible gas connector
Optional thermostats available - see Optional Items below
Certifications & Approvals: CSA Design Certified - UL Listed - ANSI Z83.20 Compliant
Optional Item:
Model VIR109165
- Line Pressure Regulator - Heavy duty, corrosion-resistant construction.  Equipped with vent-limiting device.  Does not require venting
-
Optional Item:
Model VIR109168
- 4" Sidewall or Roof Venting Cap - Can be used in sidewall or through-the-roof venting systems -
Optional Item:
Model VIR109169
- 4" Combustion Air Cap - Used for combustion air or freish air duct termination.  Aluminum construction.  Fits Type B or single wall flue pipe -
Optional Item:
Model VIR108118
- 120/240V - Programmable Digital Line Voltage Thermostat
- Features separate programs for weekdays and weekends with up to 4 settings per day.  This is a hardwire thermostat -
Optional Item:
Model VIR28795
- 4" Vertical Venting Kit - for direct venting of combustion by-products.  Includes three 24" pipe lengths, one 12" "L" pipe length, increaser, roof flashing, storm collar, roof cap, 90º elbow and draft hood connector.  Additional lengths of pipe available -
Optional Item:
Model VIR29794
- 4" Horizontal Venting Kit - for direct venting of combustion by-products.  Includes three 24" pipe lengths, one 12" straight pipe, one appliance adapter, one horiztonal termination cap, one wall thimble, two 45º elbows and draft hood connector.  Additional lengths of pipe available -
Please allow 2 weeks for delivery - this heater is built to order
Overall Dimensions: 153" L x 31" W x 6.25" H
Weight: 117 Lbs
1 Year Warranty (Includes Parts & Labor)
Made in the U.S.A.
*WE OFFER FREE SHIPPING TO ANYWHERE IN THE CONTIGUOUS (LOWER 48) UNITED STATES.
ALL OTHER DESTINATIONS, PLEASE CONTACT US FOR A FREIGHT QUOTE*
Powered by
eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.
Track Page Views With
Auctiva's FREE Counter